Coway BA13-BE - Manual (Page 15)

14
cHeckIng tHe controL PaneL
‘stop’ button
all currently operating functions will stop.
‘nozzle Position’ button
use this button to control the nozzle
position during the rear cleansing/front
cleansing operation. you can move
the nozzle in 5 levels using the ‘nozzle
Position’ button.
‘Water temp.’ button
use this button to control the water
temperature. whenever the ‘water
temp.’ button is pressed, you can control
the water temperature in 4 levels (L m
H Off).
‘sterilization’ button
use this button to perform the
sterilization function. sterilizing water is
ejected for 30 seconds to sterilize and
clean the nozzle.
‘deodorization’ button
use this button to perform the
deodorization function. when you press
this button, the deodorization function is
performed for approximately 1 minute.
※ For the BA13-BR/BE only
3
7
9
11
12
※ For the BA13-BR/BE only
remote control signal transmitter
transmits the signal when a remote control
button is pressed.
11
‘Wide’ indicator
whenever the ‘wide’ button is pressed,
the indicator cycles through the following
options: Straight line (Blue) Level1(Pink)
Level2(Red).
4
‘seat temp.’ button
use this button to control the seat
temperature. whenever the ‘seat temp.’
button is pressed. you can control the
seat temperature in 4 levels (L m H
Off).
10
‘Wide’ button
use this button to control the water
ejection range when using the cleansing
function. you can select the angle of the
water in 3 levels using the wide function
button (Straight Line level 1 Level 2).
whenever this button is pressed, the
wide function indicator turns a different
color.
8
‘Move’ button
use this button to use the move function.
if you press the ‘move’ button, as the
nozzle is moved back and forth while
you operate the rear cleansing/front
cleansing function, you can clean a
wider area.
5
‘dry’ button
use this button to use the drying
function. it helps the drying process after
using the rear cleansing/front cleansing
function.
4
‘Water Pressure/dry temp.’ button
you can control the water pressure
in 3 levels (L m H) and control the air
dryer temperature in 4 levels (L m
H OFF) using the Water ‘Pressure/Dry
temp.’ button.
you can control the water pressure when
operating the rear cleansing/front cleansing
functions and control the air dryer temperature
when operating the drying function.
6
‘Water temp.’ indicator
whenever the ‘water temp.’ button is
pressed, the temperature control indicator
cycles through the following order:
L(Blue) M(Pink) H(Red) off.
12
display
‘seat temp.’ indicator
whenever the ‘seat temp.’ button is
pressed, the temperature control indicator
cycles through the following options:
L(Blue) M(Pink) H(Red)Off.
3
‘rear’ button
use this button to use the rear cleansing
function.
‘front’ button
use this button to use the front cleansing
function for women.
1 2
control panel
※ For the BA13-BR/BE only
※ For the BA13-BR/BE only
1210964 BA13 사용설명서_수출영문_(09.03.23).indd 14 2009.3.24 10:13:15 AM