Cabletron Systems SmartCell 6A000 - Manual (Page 82)

Appendix B-6 SmartCell 6A000 User Guide
MIB Exceptions SmartCell 6A000 and SNMP
• atmConfigSigType — The values given below are not supported
-

- 


- 

- 
 


- 
  


• atmConfigSigSide — The values given below are not supported
-

-  
• atmfVccQoSCategory — Always 0 as this object is deprecated
• atmfSrvcRegPort — Always 0
• atmfSrvcRegAddressIndex — Always 1
• atmfSrvcRegServiceID — Always 1.3.6.1.4.1.353.1.5.1
• znIpAtmClientDDVcType — Accepts only pvc(2) in sets
• lecMulticastSendType — Accepts only bestEffort (1)
• lecMulticastSendAvgRate — Accepts values only up to 370370
• lecMulticastSendPeakRate — Accepts values only up to 370370
• leArpEntryType — Accepts only staticVolatile (4) and staticNonVolatile (5)
• lesControlTimeout — Read-only
B.5.2 Not Supported
The following MIB objects are not supported. If used, these objects return either the value zero or the message, "Not
supported."
• atmInterfaceMaxVpcs
• atmInterfaceConfTable
• atmInterfaceConfVpcs
• atmInterfaceConfTable
• atmInterfaceDs3PlcpTable
• atmInterfaceTCTable
• atmVplTable
• atmVpCrossConnectIndexNext
• atmVpCrossConnectTable
• atmSvcVpCrossConnectTable
• atmSigSupportTable
• atmSigDescrParamTable
• atmIfAdminAddrTable
• atmVclAddrBindTable
• atmAddrVclTable