Canon 220EP - Manual (Page 8)

4
ScanFront Setup Overview
Follow the procedures below to set up the ScanFront 220e/220eP.
1. Important Safety Instructions (See p. 5)
Read the safety warnings and precautions to ensure safe
operation of this device.
2. Names and Functions of Parts (See p. 9)
Learn the names and functions of the parts of this device.
3. Checking the Supplied Accessories (See p. 11)
Confirm that all of the supplied accessories are included.
4. Removing the Packing Materials and Attaching
the Feed Roller (See p. 13)
Remove the packing materials protecting the device, and
attach the supplied feed roller. (See p. 13.)
5. Connecting the AC Adaptor and Connecting to
a Network (See p. 16)
Move the device to the desired installation site, and
connect the AC adaptor and network cable.
6. Turning the Power ON and OFF (See p. 17)
Use the power switch to turn the device ON, and press
[Power off] on the touch panel to turn it OFF.
7. Establishing the Connection between the
Device and ShareScan Services Manager (See
p. 18)
In order to configure the various settings of eCopy
ShareScan and QuickConnect to suit your requirements,
you must first establish a connection between the
ScanFront 220e/220eP and eCopy ShareScan Services
Manager.
This section describes how to configure settings on the
ScanFront 220e/220eP and eCopy ShareScan Services
Manager to establish a connection.
8. Configuring ShareScan Services Manager
(See p. 24)
After connection is established, you can configure the
various settings of eCopy ShareScan and Quick Connect to
suit your requirements.
For details, please refer to the eCopy ShareScan 4.5
Installation and Setup Guide (electronic manual).
9. Documents (See p. 25)
This section describes the types of paper supported by the
device.
10. Preparing the Device (See p. 27)
Prepare the device for document loading.
11. Placing Documents (See p. 30)
This section describes how to place documents in the
device.
12. Clearing a Paper Jam or Double Feed Error
(See p. 32)
This section describes how to clear paper jams.
13. Fingerprint Sensor (ScanFront 220eP) (See
p. 34)
Register fingerprints on the device to enable use by
authenticated users only. (ScanFront 220eP only)
14. Basic Scanning Procedure (See p. 36)
This section gives an overview of the procedure for
scanning a document, using the example of scanning from
the Home screen.