Philips AZ1202-17 - Manual (Page 3)

BASIC FUNCTIONS
©POWER:
CD. TUNER, TAPE., .selects the sound source
©INCREDIBLE
SURROUND...... .....creates a phenomenal
stereo effect
©OBB....................... .enhances the bass
©VOLUME............. ...adjusts the volume level
©0............................ 3.5mm headphor» socket
Note: Connecting the headphones will switch
off the speakers.
©Display
©CD PLAYER
A OPEN................ opens the CD
compartment
STOP □....................stops CD play and erases
the program
PLAY PAUSE >0D...starts and interrupts CD
play
SEARCH KM WH.... skips and searches
forward and backward
PROGRAM............programs track numbers
‘ and reviews the program
SHU^ ....................plays CO tracksm random
order
REPEAT....... ......... repeats a track, the entire
CD. or the program
©RADIO
TUNING................tunes to radio stations
BAND...................selects the wave band
©CASSETTE RECORDER
PAUSE II....,............interrupts recording or
playback
STOP-OPEN ...stops the tape and opens
the cassette compartment
SEARCH ................ rewinds the tape
SEARCH ^..............fast forwards the tape
PLAY <3................ starts playback
RECORD O............ starts recording
...
FwthaaatloplioMl)
Open the battery compartment of the set and insert 6 batteries,
type R20. Uil«1 or D-cells (preferably alkaline).
Remove batteries if they are dead or if the set is not going to be
used for a long time.
Baffle/Ms coateia durniicaf substaace^ so ^fsbouldba
dispoaadafptopaify.
1 Check whether the voltage as shown on the type plate
corresponds to your local voltage. If it does not. consult your
dealer or service organization. The type plete is loceted on
the bottom efdbe set
2 If the set is equipped with a VOLTAGE selector ©, set this
selector to the local voltage.
3 Connect the AC power cord to the AC MAINS socket arid to the
wall socket. This switches on the AC power supply. The AC
power cofd is ieside the battetycomperimeat
The battery supply will be switched off when the set is connected
to the AC power. To change to battery supply, disconnect the AC
power cord from the unit's AC MAINS socket.
To disconnect the set from AC power completely, remove the AC
power cord from the wall socket.