Citizen Systems CD-S500A - Manual (Page 20)

20
Chapter3 Preparing the Printer
Connecting the Interface Cable
Turn off the power to the printer and insert the connectors being careful about their
orientation.
Connections
Always hold the connector when pulling out a cable.
Install the interface cable so that it will not be caught on your shoes etc.
Connecting the serial (RS232C) interface cable
Make sure that you insert it firmly and fix it in place by tightening the screw.
Connecting the parallel (IEEE1284) interface cable
Make sure that you insert it firmly and fix it in place by turning the attachment screws in
the direction shown by the arrow.
Parallel (IEEE1284) interface cable
Serial (RS232C) interface cable
Caution