Replacing the motor protection filter, Replacing the micro-hygiene filter – Bosch BSG81 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing the motor protection filter
You should change the microsan filter with each new
replacement dust bag pack
(at least after every five dust bags).
Open the dust compartment cover.
Pull the filter holder out in the direction of the arrow
and open it.
Dispose of the motor protection filter and fit a new
motor protection filter.
Close the filter support, slide into the vacuum
cleaner and close the dust compartment cover.
Replacing the micro-hygiene filter*
You should change the microsan filter with each new
replacement filter pack
(at least after every five dust bags).
Press the exhaust grille latch in the direction of the
arrow to unlatch the exhaust grille and open it.
Press the filter frame latch in the direction of the arrow
to unlatch the filter frame and remove it.
14