Clarity E814CC - Manual (Page 50)

50
using your CorDless HanDseT
add a sPeed diaL nUmber
1. In idle mode, press <menU/seLect>, then <UP/down> to select Directory.
2. Press <menU/seLect>, then <UP/down> to select Speed dial.
3. Press <menU/seLect>, then <UP/down> to select an empty speed
dial location.
4. Press <menU/seLect> to access the directory list, then press <UP/down>
to select the desired directory entry.
5. Press <menU/seLect> to save. The name of the desired directory entry
appears in the selected speed dial location.
note:
If the directory is empty, when you press menU/seLect in step 4, the screen
shows directory emPty.
If the speed dial location you selected is occupied, the new directory entry you selected
replaces the old one. Take caution not to replace entries you do not wish to delete from
the speed dial locations.
Dial the speed Dial number
1. In idle mode, press and hold a dial pad key (0 through 9) to display the desired speed
dial entry. The handset automatically dials out the displayed number.
–OR–
2. Press <taLK off/cLear> within one second to stop dialing the
displayed number.
note:
If the speed dial location you selected is empty, the screen shows the speed dial
list instead.
Delete the speed Dial number
1. In idle mode, press <menU/seLect>, then <UP/down> to select Directory.
2. Press <menU/seLect>, then <UP/down> to select Speed dial.
3. Press <menU/seLect>, then <UP/down> to scroll to a speed dial location.
4. Press <mUte/X> to delete the selected speed dial location. A confirmation
tone sounds. Deleting speed dial locations does not affect entries in the directory.