Cobra Electronics ESD-9870 - Manual (Page 8)

9
3
O P E R AT I O N • S E T T I N G S
8
3
O P E R AT I O N • E A S Y S E T P R O G R A M M I N G
* The settings for these user modes can also be changed with the one-button method. See the description of each user mode (following) for details.
EasySet Programming Menu (continued)
Highway/City Mode
Your detector has a Highway mode and
three different levels of City modes: City X,
City X Beep Off and City X+K. City X mode
sounds a single beep when the signal is first
detected. City X Beep Off mode prevents all
X band audio alerts until the signal strength
reaches level 3. City X+K mode combines
the City X mode with prevention of K band
audio alerts until the signal strength reads
level 1. This will reduce false alerts while
you are driving in or near urban areas
where there are many sources for conflicting
X or K band signals such as microwave
towers and automatic door openers.
Press and release the SET/CITY button to
switch between Highway mode or City
mode (City X, City X Beep Off or City X+K
mode). In Highway mode you will hear
“highway” in Voice Alert mode or 2 beeps
in Tone mode and “
h” will appear in the
display. In City mode (City X, City X Beep
Off or City X+K mode) you will hear “city”
in Voice Alert mode or 1 beep in Tone mode
and “
c” will appear in the display.
Press and hold the SET/CITY button to set
the City mode default. The three City
modes will cycle as long as the SET/CITY
button is held. When the SET/CITY button
is released, the City mode currently
displayed will be set. (See page 7 for
instructions on using the Program mode to
select a City mode default.)
The factory setting is Highway. The factory
City mode default setting is City X.
SET/CITY button
SET/C
ITY BUTTON
PRESS & HOLD
SE
T/
CIT
Y
BU
TTO
N
PR
ES
S
&
HO
LD
SET
/C
ITY
BU
TT
O
N
PR
ES
S &
HO
LD
City
X+K
City X
City X
Beep Off
N W c
N W h
City X, City X Beep Off, City X+K modes
Highway mode
MODE SETTING VISUAL RESULT
Auto Mute Mode AutoMute On The audio volume of all alerts will be
automatically muted after 4 seconds for
as long as the signal is detected.
AutoMute Off All alerts will sound at full volume for as
long as the signal is detected.
Voice Alert or Tone Mode Voice Alert Voice is heard for alerts and
confirmation of user settings.
Tone Alert Tone is heard for alerts and
confirmation of user settings.
Set Compass Drive in 2 circles... Allows you to calibrate the compass.
(see page 15 to calibrate compass)
Pop Ka Detect Mode Pop On The unit will detect Pop Ka signals.
Pop Off The unit will not detect Pop Ka signals.
VG-2 Detect Mode VG-2 On The unit will detect VG-2 signals.
VG-2 Off The unit will not detect VG-2 signals.
VG-2 Detect Audio Mode VG-2 Audio On With VG-2 Detect On, the unit
(not shown if VG-2 Detect is off) will give audible alerts for VG-2 signals.
VG-2 Audio Off With VG-2 Detect On, the unit
will give only visual alerts for VG-2 signals.
Spectre Detect Mode Spectre On The unit will detect Spectre signals.
Spectre Off The unit will not detect Spectre signals.
Spectre Detect Audio Mode Spectre Audio On With Spectre Detect On, the unit
(not shown if Spectre Detect is off) will give audible alerts for Spectre signals.
Spectre Audio Off With Spectre Detect On, the unit
will give only visual alerts for Spectre signals.
SmartPower Mode Smart Power On Turns SmartPower on.
Smart Power Off Turns SmartPower off.
Set Display Dim Mode Default* Dim Partially dimmed for dusk or night driving.
Dimmer More dimmed for dusk or night driving.
Dark Display is off.
Restore Factory Settings Are you sure? Resets user modes and settings
Press SET to confirm... to factory default.
Exit Program EXIT PROGRAM Allows you to exit Program mode.
Settings Saved!