Location and function of controls – Sears 113.21308 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
location and function of controls
1. BELT GUARD . . . Covers pulleys and belt during
operation of drill press.
2. BELT TENSION LOCK HANDLES . .. Tightening
handles locks motor bracket support to maintain
correct belt distance and tension.
3.
HEAD LOCK SET SCREWS . . . Locks the head
to the column. ALWAYS have them locked in place
while operating the drill press.
4. TABLE SUPPORT... Rides on column to support
table.
5. COLUMN SUPPORT . . . Supports column and
provides mounting holes for column to base.
6. SUPPORT LOCK HANDLE . . . Tightening locks
table support to column. Always have it locked in
place while operating the Drill Press.
7.
BASE ... Supports Drill Press. For additional sta
bility, holes are provided in base to bolt Drill Press
to bench. (See “Additional Safety instructions for
Drill Presses").
8.
SPRING CAP . . . Provides means to adjust quill
spring tension.
9.
DEPTH POINTER .. . Indicates drilling depth and
is located between stop nuts.
10. DEPTH SCALE . . . Shows depth of hole bearing
drilled in inches and millimeters.
11
COLUMN . . . Connects head, table, and b
a one-piece tube for easy alignment ann
ment.
move
12. BEVEL
SCALE . . . Shows degree table ,s tv,.,
for bevel operations. Scale is mounted on
support.
13.
TABLE BEVEL LOCK
. . .
Locks the tabin
, p
position from 0'-45v
'
f
14.
TABLE
. . .
Provides working surface to
son-,.,
workpiece.
15.
FEED HANDLE . . . For moving the chuck un .n-
down. One or two of the handles may be remov^
if necessary whenever the workpiece is of such
unusual shape that it interferes with the hancfles
CHUCK . . . Holds drill bit or other recommended
accessory to perform desired operations
""
FEED
STOP ROD . . . Holds stop nuts for dnllino
to specific depths.
STOP
NUTS . . . Limits the downward movement
of the quill at any desired point within its travel
and prevents the pointer from moving upward
19.
ON-OFF SWITCH . . . Has locking feature, this
feature is intended to prevent unauthorized and
possiable hazardous use by children and others.
16.
17.
18