Sears EZ3 917.258542 User Manual
Crflftsmrn
Advertising
Table of contents
Document Outline
- CRflFTSMRN
- MODEL NUMBER 917.258542
- • Assembly ® Operation
- ® Customer Responsibilities
- CONTENTS OF HARDWARE PACK
- Parts packed separately in carton
- Parts bag contents not shown full size
- TOOLS REQUIRED FOR ASSEMBLY
- TO REMOVE TRACTOR FROM CARTON
- BEFORE ROLLINOTRACTOR OFF SKID
- ATTACH STEERING WHEEL (See Fig. 1)
- TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)
- INSTALL SEAT (See Fig. 4)
- CHECK TIRE PRESSURE
- CHECK DECK LEVELNESS
- CHECK FOR PROPER POSITION OF ALL
- CHECK BRAKE SYSTEM
- ASSEMBLE GAUGE WHEELS TO MOWER DECK (See Fig. 5)
- INSTALL MULCHER PLATE (See Figs. 6 & 7)
- TO CONVERT TO BAGGING OR DISCHARGING
- la
- {' a| a
- l\l ^ii
- e N H L (®)
- READ THIS OWNER’S WIANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR
- TO SET PARKING BRAKE (See Fig. 9)
- STOPPING (See Fig. 9)
- TO USE THROTTLE CONTROL (See Fiq. 9)
- TO MOVE FORWARD AND BACKWARD (See Fig. 9)
- TO ADJUST MOWER CUTTING HEIGHT (See Fig. 9)
- TO OPERATE MOWER (See Fig. 10)
- TO OPERATE ON HILLS
- TO TRANSPORT
- BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL (See Fig. 17)
- ADD GASOLINE
- TO START ENGINE (See Rg. X)
- MULCHING MOWING TIPS
- GENERAL RECOMMENDATIONS
- TRACTOR
- TO REMOVE MOWER (See Fig. 19)
- TO INSTALL MOWER (See Fig. 19)
- TO LEVEL MOWER HOUSING
- 21
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 24)
- TO ADJUST BRAKE (See Fig. 25)
- TO REPLACE MOTION DRIVE BELT (See Fig. 26)
- TRANSAXLE SHIFTER LINKAGE AND ADJUSTMENT (See Figs. 27 and 28)
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOE-IN/CAMBER
- TO REMOVE WHEEL FOR REPAIRS
- TO START ENGINE WITH A WEAK BATTERY (See Fig. 30}
- SERVICE AND ADJUSTMENTS
- STORAGE
- TROUBLESHOOTING POINTS
- TROUBLESHOOTING POINTS
- .'S/'
- e N H L (®)
- l\l ^ii
- MODEL NUMBER 917.258542