To empty the solution tank, Upholstery nozzle, Floor tools – Sears 175 User Manual
Page 8: Ahachments, Operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
TO EMPTY THE SOLUTION TANK
See Figure 11
When cleaning is completed, both the Recovery Ta nk and the
Solution Tank should be emptied prior to storage. Empty the
Recoveiy Tank as described earlier. There are three metlwds
of emptying tlie Solution Tank,
Method 1:
1. Disconnect Short Cord from Recovery Tank,
2. Remove Recovery Tank from Solution Tank and pour
solution out of the Filler Opening.
Method 2:
1. Place Floor Nozzle in bath tub or container.
2, Depress Solution Release Trigger and spray until empty.
Method 3:
1. Remove Floor Nozzle and insert Wand into Solution
Tank tlirough the Filler Opening.
2. Vacuum solution out,
3. All solution is now in Recovery Tank. Empty Recovery
Tank as described earlier.
AHACHMENTS
UPHOLSTERY NOZZLE
See Figure 12
Cleanmore Carpet Cleaner Upholstery Nozzle is an attach
ment for furniture upholstery cleaning. The upholstery
nozzle may also be used to clean auto upholstery or carpet
ing. In addition, the nozzle may be used to clean carpeted
stairs and other areas difficult to clean with the normal floor
nozzle.
FLOOR TOOLS
See Figure 13
The Bare Floor/Carpet Brush (1) may be used on floors
without carpet for DRY cleaning with paper dust bag in
stalled.
Tire Squeegee Attachment (2) is useful for WET pickup.
CAUTION;DO
NOT run the Pump Motor when using these
attachments. To prevent Pump Motor from operating, make
sure Pump Motor Switch is in "OFF" position, or unplug the
Short Cord from the Solution Tank to the Recovery Tank.