Assembly instructions, To remove chipper-shredder from carton, Tools required for assembly – Sears 247.795860 User Manual
Page 5: Iuq)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY INSTRUCTIONS
co:
Flat—
Washer
5/16" I.
iUQ)
Hex Lock
Nut 5/16-18
Thread
Hex Bolt
-5/16-18
X
8-3/8" Long
IMPORTANT: This unit is shipped WITHOUT GASO
LINE or OIL. After assembly, see operation section of
this manual for proper fuel and engine oil recommen
dations.
NOTE: To determine right and left hand sides of your
chipper-shredder, stand behind and face the hopper
(engine is at the front of the unit).
Your chipper-shredder has been completely assem
bled at the factory, except for the hopper assembly
(hopper hood and upper leaf ramp section have been
sub-assembled), upper guide assembly, chute deflec
tor and the catcher bag. The hardware pack and safe
ty glasses are also included in the carton.
The hardware pack contains the parts shown in figure
1 (shown full size).
TO REMOVE CHIPPER-SHREDDER FROM CARTON
Cut the corners of the carton. Remove all packing
inserts. Roll chipper-shredder out of the carton. Make
certain all parts and literature have been removed
before the carton is discarded.
TOOLS REQUIRED FOR ASSEMBLY
(1) Phillips Screwdriver
(2) 1/2" or Adjustable Wrenches
(2) 7/16" or Adjustable Wrenches
Truss Machine Screws
1/4-20
X
1/2" Long
Hex Lock Nuts
1/4-20 Thread
FIGURE 1.