Sears EZ3 917.2566 User Manual
Crrftsmfln, Assembly
Advertising
Table of contents
Document Outline
- smm
- CRRFTSMflN
- MODEL NUMBER 917.256600 owner s manual
- CONTENTS OF HARDWARE PACK
- Parts Bag contents shown full size
- Parts packed separately In carton
- Parts bag contents not shown full size
- TOOLS REQUIRED FOR ASSEMBLY
- TO REMOVE TRACTOR FROM CARTON
- BEFORE ROLLING TRACTOR OFF SKID
- ATTACH STEERING WHEEL (See Fig. 1)
- TO ROLL TRACTOR OFF SKID (See Fig. 6)
- CONNECT BATTERY (See Fig. 2)
- INSTALL SEAT (See Fig. 3)
- CHECK TIRE PRESSURE
- CHECK BRAKE SYSTEM
- INSTALL MOWER AND DRIVE BELT (See Figs. 4 and 6)
- CHECK DECK LEVELNESS
- CHECK FOR PROPER POSITION OF ALL BELTS
- INSTALL MULCHER PLATE (See Figs. 5A and
- TO CONVERT TO BAGGING OR DISCHARGING
- ©
- I
- KNOW YOUR TRACTOR
- READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR
- TO SET PARKING BRAKE (See Fig. 7)
- STOPPING (See Fig. 7)
- TO USE THROTTLE CONTROL (See Fig. 7)
- TO MOVE FORWARD AND BACKWARD (See Fig. 7)
- TO ADJUST MOWER CUTTING HEIGHT (See Fig. 7)
- TO ADJUST GAUGE WHEELS (See Fig. 8)
- TO OPERATE ON HILLS
- TO TRANSPORT
- BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL (See Fig. 15)
- ADD GASOLINE
- TO START ENGINE (See Fig. 7)
- MOWING TIPS
- GENERAL RECOMMENDATIONS
- ENGINE
- CLEANING
- TO REMOVE MOWER (See Fig. 18)
- TO INSTALL MOWER
- TO LEVEL MOWER HOUSING
- TO REPLACE MOWER DRIVE BELT
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 24)
- TO ADJUST ATTACHMENT CLUTCH (See
- TO ADJUST BRAKE (See Fig. 26)
- TO REPLACE MOTION DRIVE BELT (See Fig. 27)
- TRANSAXLE SHIFTER LINKAGE AND ADJUSTMENT (See Figs. 28 and 29)
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOE-IN/eAMBER
- TO REMOVE WHEEL FOR REPAIRS (See Fig. 30)
- TO START ENGINE WITH A WEAK BATrERY (See Fig. 31)
- TO REPLACE HEADLIGHT BULB
- INTERLOCKS AND RELAYS
- TO REPLACE FUSE
- TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 32)
- ENGINE
- STORAGE
- TROUBLESHOOTING POINTS
- TROUBLESHOOTING POINTS
- KNOW YOUR TRACTOR
- I