Cord storage, Carrying your vac – Sears 113.177571 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cord Storage
1. Your Wet/Dry Vac has a convenient
area to store your power cord.
2. Coil the power cord neatly and store it
below the handle, when not in use, in
the opening above the warning label
and model number label.
CAUTION:
A
partially
unwrapped
cord may fall in coils near your feet.
You could trip. To avoid this, always
fully unwrap the cord before plugging
it in.
Carrying Your Vac^
Your Wet/Dry Vac is supplied with an eas
ily adjustable shoulder strap. Adjust the
strap so that the Wet/Dry Vac rests com
fortably on your hip.
To Lengthen The Strap: Pull on strap at
“A”, the length you would like to lengthen
the strap. Then pull on strap at “B” until
tight.
To Shorten The Strap: Pull on strap in a
downward position at “A”, the length you
would like to shorten strap. Then pull on
rivet end of strap until the strap becomes
tight.
To Carry Your Wet/Dry Vac: Place strap
on your shoulder as pictured. The other
method of carrying is to use the handle
that is built into the power head. To avoid
tripping on the strap, drape it on the out
side as pictured.
Handle
Power Cord