Sears 917.25597 User Manual
Sears Gardening equipment
Advertising
Table of contents
Document Outline
- A.
- A
- I. GENERAL OPERATION
- II. SLOPE OPERATION
- III. CHILDREN
- IV. SERVICE
- PRODUCT SPECÎFICATÎONS
- CUSTOMER RESPONSIBILITIES
- LIMITED TWO YEAR WARRANTY ON ELECTRIC START RIDING EQUIPMENT
- LIMITED 90 DAY WARRANTY ON BATTERY
- TABLE OF COMTENTS
- ENGINE
- PERFORMANCE
- Parts packed separately in carton
- Parts bag contents not shown full size
- TOOLS REQUIRED FOR ASSEMBLY
- TO REMOVE TRACTOR FROM CARTON
- BEFORE ROLLING TRACTOR OFF SKID
- HOW TO SET UP YOUR TRACTOR
- PREPARE BATTERY (See Fig. 3)
- INSTALL SEAT (See Fig. 4)
- CHECK TIRE PRESSURE
- CHECK BRAKE SYSTEM
- INSTALL MOWER AND DRIVE BELT (See Fig. 5 and 8)
- CHECK DECK LEVELNESS
- CHECK FOR PROPER POSITION OF ALL
- INSTALL BATTERY (See Figs. 6 and 7)
- READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR.
- TO SET PARKING BRAKE (See Fig. 9)
- STOPPING (See Fig. 9)
- TO USE CHOKE CONTROL (See Fig. 9)
- TO USE THROTTLE CONTROL (See Fig. 9)
- TO MOVE FORWARD AND BACKWARD (See Fig. 9)
- TO ADJUST MOWER CUTTING HEIGHT (See Fig. 9)
- TO ADJUST GAUGE WHEELS {See Fig. 10)
- TO OPERATE MOWER {See Figs. 8 and 9)
- TO OPERATE ON HILLS
- TO TRANSPORT
- BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL {See Fig. 12)
- ADD GASOLINE
- TO START ENGINE (See Fig. 9)
- MOWING TIPS
- BEFORE EACH USE
- BRAKE OPERATION
- BLADE CARE
- BLADE REMOVAL (See Fig. 14)
- TO SHARPEN BLADE (See Fig. 15)
- TRANSAXLE COOLING
- CHECK TRANSAXLE OIL LEVEL (See Fig. 16)
- BATTERY (See Fig. 17)
- LUBRICATION
- TO CHANGE ENGINE OIL (See Figs. 18 and 19)
- CLEAN AIR SCREEN (See Fig. 20)
- CLEAN ENGINE COOLING FINS (See Fig. 20)
- MUFFLER
- SPARK PLUGS
- IN-LINE FUEL FILTER (See Fig. 22)
- TRACTOR
- TO REMOVE MOWER (See Fig. 23)
- TO LEVEL MOWER HOUSING
- TO REPLACE MOWER DRIVE BELT
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 28)
- TO ADJUST ATTACHMENT CLUTCH (See Fig. 29)
- TO ADJUST BRAKE (See Fig. 30)
- TO REPLACE MOTION DRIVE BELT (See Fig. 31)
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOE-IN ADJUSTMENT
- FRONT WHEEL CAMBER
- TO REMOVE WHEEL FOR REPAIRS
- TO START ENGINE WITH A WEAK BATTERY (See Figs. 35 and 36)
- TO REPLACE HEADLIGHT BULB
- INTERLOCKS AND RELAYS
- TO REPLACE FUSE
- TO ADJUST ATTACHMENT LIFT SPRING (See Fig. 37)
- TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 38)
- TO ADJUST THROTTLE CONTROL CABLE (See Fig. 39)
- TO ADJUST CHOKE CONTROL (See Fig. 40)
- TO ADJUST CARBURETOR (See Figs. 41 and 42)
- STORAGE
- TROUBLESHOOTING POINTS
- TROUBLESHOOTING POINTS