Sears 917.25545 User Manual
Sears Gardening equipment
Advertising
Table of contents
Document Outline
- □
- □
- A
- A
- MAINTENANCE
- PERFORMANCE
- UNPACK CARTON
- ATTACH STEERING WHEEL (See Fig. 1)
- TO ROLL UNIT OFF SKID (See Fig. 8)
- PREPARE BATTERY (See Fig. 2)
- INSTALL SEAT (See Fig. 3)
- CHECK TIRE PRESSURE
- CHECK DECK LEVELNESS
- CHECK FOR PROPER POSITION OF ALL BELTS
- CHECK BRAKE SYSTEM
- INSTALL BATTERY {See Figs. 4 and 5)
- ASSEMBLE GAUGE WHEELS TO MOWER DECK (See Fig. 6)
- INSTALL MULCHER PLATE (See Figs. 7A & 7B)
- TO CONVERT TO BAGGING OR DISCHARGING
- READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR.
- TO SET PARKING BRAKE (See Fig, 9)
- STOPPING (See Fig. 9)
- TO USE THROTTLE CONTROL (See Fig. 9)
- TO MOVE FORWARD AND BACKWARD (See Fig. 9)
- TO ADJUST MOWER CUTTING HEIGHT (See Fig. 9)
- TO OPERATE yOWER (See Fig. 10)
- TO OPERATE ON HILLS
- TO TRANSPORT
- CHECK ENGINE OIL LEVEL
- ADD GASOLINE
- TO START ENGINE (See Fig. 10)
- MULCHING MOWING TIPS
- BEFORE EACH USE
- TRACTOR
- BRAKE OPERATION
- TIRES
- BLADE CARE
- BLADE REMOVAL (See Fig. 13)
- TO SHARPEN BLADE (See Fig. 14)
- BATTERY (See Fig. 15)
- TRANSAXLE COOLING
- LUBRICATION
- AIR FILTER (See Fig. 16)
- CLEAN AIR SCREEN (See Fig. 16)
- CLEAN AIR INTAKE/COOLING AREAS
- ENGINE OIL FILTER (See Fig. 17)
- MUFFLER
- SPARK PLUGS
- IN-LINE FUEL FILTER (See Fig. 18)
- TO REMOVE MOWER (See Fig. 19)
- TO INSTALL MOWER (See Fig. 19)
- TO LEVEL MOWER HOUSING
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 24)
- TO ADJUST BRAKE (See Fig. 25)
- TO REPLACE MOTION DRIVE BELT (See Fig. 26)
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOE-IN/CAMBER
- TO REMOVE WHEEL FOR REPAIRS (See Fig. 27)
- TO START ENGINE WITH A WEAK BATTERY (See Figs. 28)
- TO REPLACE HEADLIGHT BULB
- INTERLOCKS AND RELAYS
- TO REPLACE FUSE
- TO REMOVE HOOD AND GRILL (See Fig. 29)
- TO ADJUST THROTTLE CONTROL CABLE (See Fig. 30)
- TO ADJUST CARBURETOR (See Fig. 31;
- STORAGE
- TROUBLESHOOTING POINTS
- TROUBLESHOOTING POINTS