Adjusting oven temperature, Clock – Sears KENMORE 46520 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ADJUSTING OVEN TEMPERATURE
The temperature In you r new oven has been set correctly
at t he factory, so be sure to follow the recipe temperatures
and cooking times the first few times you bake In your
oven.
If you think the oven should be hotter or cooler, you can
adjust the oven temperature yourself. To decide how
much
to
change
the
temperature,
set
the
oven
temperature 25°F higher or lower than the temperature
In your recipe, then bake. The results of this "test"
should give you an Idea of how much the temperature
should be changed.
To adjust temperature follow these Instructions:
1. Push BAKE.
2. Select a temperature between SOfTF and 550°F by
pressing the UP arrow. See Fig. 1.
Step 1:
PRESS
Step 2:
SET BETWEEN
Flg.1
3. IMMEDIATELY, press BAKE again and hold for about
4seconds. ThIsdisplay will show "ON" and "BAKE"
will flash In the display. See Fig. 2.
Continue to hold BAKE until the display changes to
show the preset oven display. See Fig. 3.
n n °
LI LI
PRESET OVEN DISPLAY
4. The temperature can be adjusted up to +35*’F hotter
or -35°F cooler. Use the UP or Down arrow to select
the temperature adjustment you want. See Fig. 3.
The temperature you select Is the new preset oven
display.
Step 4:
SET BETWEEN -35°F
AND +35°F
PRESET
OVEN
DISPLAY
NOTE:
Fig.3
This
adjustment
will
not
affect
Broil
or
Clean
temperatures. It will be remembered when power
is removed.
5. When you have made the adjustment, push CLOCK
to retu rn t he display to the time of day. U se you r oven
as you would normally.
Step 5:
CLOCK
Fig. 2
21
NESER71