Onkyo TX-SV535 - Manual (Page 27)

Recording a source
Recording an audio source
Tape recording
With the TX-SV535 you can perform recording while listening to the sound of another source through speakers or headphones. Make all con-
ncctions between the tape deck and the unit as shown in the system connections diagram.. When recording a tape while the m.ultiple room-
remote control is connected, turn the MR off (the MR OFF indicator will light) to disable remote control operation from another rooms.
; 1
i2
'
Blink
SOURCE
3
Lit
Recording and dubbing to a tape deck connected
to TAPE-1
. When recording the same sonree you are listening to
1. Press the input selector button to select the source to he
recorded, (other than TAPE-1)
2. Press the REC OUT button.
3. Press the REC OUT button again while the REC OUT indi­
cator is flashing.
The SOURCE indicator and the source you have chosen will be
displayed in red boxes. (*)
4. Start the device selected in stepl while setting the tape deck
connected to TAPE-1 to recording mode.
NOTE:
•
Never change the positions of any controls on this unit during
recording and dubbing operations.
• Pressing the input selector button during recording will change
the source being recorded.
• When the TAPE-2 MONITOR indicator is on. only TAPE-2
can be recorded and if the input selector is changed, the TAPE-
2 MONITOR indicator will not change.
1 I
SOURCE
Blink
immmmmmmmmmmmmmmmmmmmmm
: ' W „ ■
Lit
I*)
b. When recording a source different from the one you are listen­
ing to
. Press the REC OUT button.
, . Press the input selector button for the source to be
recorded, (other than TAPE-1) while the REC OUT indica­
tor is flashing.
The chosen source will be displayed in a red box. (*)
Start the device selected in step 2, and start recording on
the tape deck connected to TAPE-1, or on any recording
device connected to the VTDEO-2 or VIDEO-3 audio output
jacks.
NOTE:
•
The source you selected to record will be output form the
TAPE-1, VIDEO-2 and VlDEO-3 REC OUT jacks. The source
you are listening to does not change.
• If you choose to record from EM or AM while listening to
another source, the tuner's frequency and group displays will
be shown for 3 seconds.
27