Canon B150 - Manual (Page 130)

What happens when Fax/Tel Mode is selected
To select Fax/Tel Mode
1
Press [RECEIVE MODE] until ″ Fax/Tel Mode ″ appears in the LCD.
To change the Fax/Tel Mode settings:
1
Press [FUNCTION].
2 Press [ ] until RX SETTINGS is displayed in the LCD. Press [START/COPY].
3 Press [ ] until FAX/TEL SWITCH is displayed in the LCD. Press [START/COPY].
4 The LCD displays RING START TIME. Press [START/COPY]. Choose between 0 and 30
SECONDS using the numeric buttons, then press [START/COPY] again.
5 The LCD displays F/T RING TIME. Press [START/COPY]. Choose between 10 and 300
SECONDS using the numeric buttons, then press [START/COPY] again.
6 The LCD displays F/T SW ACTION. Press [START/COPY]. Press [ ] or [ ] to choose
RECEIVE or DISCONNECT. Press [START/COPY].
7 Press [STOP] to finish registration and return to the standby mode.
Type of call
Tel. charges begin
for caller.
RING START
TIME
(Factory setting = 8 sec.)
F/T RING TIME
(Factory setting = 22 sec.)
Telephone Fax
Sending document
manually
Fax
Sending document
automatically
Fax answers without ringing
Fax listens for FAX TONE (For 8 sec.)
FAX TONE
detected
FAX TONE is not detected
Fax starts ringing
If you do not pick up the telephone within 22
seconds
F/T SW ACTION
Choose between: Receive (Factory setting) and
Disconnect
RECEIVE
Not all fax machines are capable of sending a
FAX TONE. For those cases if you set the F/T
SW ACTION to RECEIVE, the fax switches to
receive mode automatically and starts receiving
the document. If no document comes in it
disconnects.
Document received
automatically.
(FAX TONE is
detected and fax
switches to receive
mode.)
DISCONNECT
(Factory setting)
Fax disconnects the
call.
Pick up the
telephone to talk.
Appendix
118