Solo tines, wheels – Troy-Bilt PONY E666M User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Models 664D & E666M
SOLO TINES, WHEELS
hiOTE 1; Custom Tiiling Tines are
available for your tiller. These are
special hard-faced tines that are
thicker than standard tines.
IMPORTANT; Left and right sides of
tiller are determined by standing in
operator position and facing direc
tion of forward travel.
REF.
No.
PART
No.
DESCRIPTION
QTY.
REF.
No.
PART
No.
DESCRIPTION
QTY
1
710-0514
Hex Hd. Screw, 3/8-16 x 1 *..................
16
_ _
GW-2475-1
Custom Tilling Bolo Tine, Left hand
2
GW-1270-2
Bolo Tine-single. Right hand tine
tine (see Note 1 above)......................
8
used on left side of tiller.....................
8
-
GW-2475-2
Custom Tilling Bolo Tine, Right hand
3
712-3000
Hex Locknut, 3/8-16 .......... ...... ....... .
18
tine (see Note 1 above)......... ........ .
8
5
710-3096
Hex Hd. Screw, 3/8-16 x 2, Grade 8....
2
-
GW-10802
Custom Tilling Bolo Tine Replacement
7
6W-1270-1
Bolo Tine-single. Left hand tine
Set (Inch eight ea. right hand and
used on right side of tiller.......... ....... .
8
left hand custom tines, and sixteen
8
1902154
Tine Holder. For left and right sides....
2
each of Refs. 1 and 3).................. .
1
-
1901118
Bolo Tine Replacement Set (Incl. eight
9
GW-9338
Hitch Pin........... ............ ...... ....... ......
2
ea. right hand and left hand tines,
10
1917487
Wheel and Tire Assembly ............... ......
2
and sixteen ea. Refs. 1 and 3)............ .
1
11
GW-9380
Clevis Pin, .312x1-3/4 ..... ...... ....... .
2
Specify GRADE 5 if ordering part locally.