Troy-Bilt TUFFY CRT 644A - Manual (Page 5)

Decals
For your safety and the safety of others, vari­
ous safety and operational decals are located
on your unit (see Figure 1-2).
Keep the decals clean and legible at all times.
Contact your local service dealer or the factory
for replacements if any decals are damaged or
missing.
Refer to the Parts List pages in this Manual for
decal locations, descriptions and part num­
bers.
Reverse Clutch Control
Figure 1-2: Location of safety and operating decais.
Operating Symbols ■ ■
Various ^bds (shown here, v#i word descripBcrts) |^| m
R ^
may be used m ttielillerand engine.
CHOKE CHOKE REVERSE ^
[\DTC: Yourunitm^notlwe^oftiesymtxls.
ON OFF
ROTATING TINES
Z
o — ^
FAST SLOW STOP TILLER DIRECTION LEVER DIRECTION
BAIL
ENGAGED
BAIL
DISENGAGED
A WARNING
TO AVOID SERIOUS INJURY:
- READ THE OWNER’S MANUAL.
- KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.
- KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.
- NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.
- SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UN­
CLOGGING TINES OR MAKING REPAIRS.
- KEEP BYSTANDERS AWAY FROM MACHINE.
- KEEP AWAY FROM ROTATING PARTS.
- USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS
YOU.