Crestron electronic on wall speaker - Manual (Page 57)

Crestron Adagio™ AADS Audio Distribution System
• Scroll through the preset groups by pressing up or down on the selection
control. Active preset groups are indicated with a À.
• To activate a preset group, use the selection control to find an inactive
preset group and press the SELECT button. A À will appear next to the
preset group name.
NOTE: If a room is shared by two or more preset groups, the source from
the most recently activated preset group will be routed to all of the activated
groups.
• To deactivate a preset group, use the selection control to find an active
preset group and press the SELECT button. The À next to the preset name
will disappear.
Turn off the System
Press STANDBY to turn off all of the rooms.
Operations Guide – DOC. 6458 Audio Distribution System: Adagio AADS • 53