MTD 24638L - Manual (Page 7)

AXLE PUSH CAP
(G)
4
SPACER(H)
WHEEL
7. Slide one wheel onto the axle shaft, then the
spacer (H). See figure 7.
FIGURE?.
LEFT .
HAND SIDE
OF
SPLITTER ' j ,
8. Slide the axle through the frame from the left
hand side of the splitter (as viewed from standing
behind it). Spacer should be on the engine side
of the splitter. See figure 8.
FIGURES.
N
9. Place the other wheel on the axle and secure with
push cap (H). See figure 9.
AXLE PUSH CAP (H)
FIGURES.