Assembly – NordicTrack E7SV NTEL07808.0 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
Assembly requires two persons.
Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly require^ Phillips screwdriver >
wrenches
, and a rubber mallet r------------- ^
two adjustable
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly.
Note: Some small parts may have
been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled.