Connect shift rod (see fig. 6), Remove tiller from crate, Attach clutch cable (see fig. 7) – Poulan 156335 User Manual
Page 7: Check tire pressure, Handle height, Assembly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
CONNECT SHIFT ROD (See Fig. 6)
» I n s e r t end of shift rod into hole of shift lever indicator.
FIG. 6
REMOVE TILLER FROM CRATE
» Make sure shift lever indicator is in “N” position {See
Fig. 6)
*
Tilt tiller forward by lifting handle. Separate cardboard
cover from leveling shieid.
« Rotate tiller handle to the right and pull tiller out of
carton.
ATTACH CLUTCH CABLE (See Fig. 7)
• Hook end of clutgi],, cable through hole in control bar
bracket.
CHECK TIRE PRESSURE
The tires on your unit were overinflated at the factory for
shipping purposes. Correct and equal tire pressure Is
important for best tilling performance.
» Reduce tire pressure to 20 PS! (1.4 kg/cm^).
HANDLE HEIGHT
» Handle height may be adjusted to better suit operator.
(See “TO ADJUST HANDLE HEIGHT” in the Service
and Adjustments section of this manual).