MTD 245-650-000 - Manual (Page 4)

NOTE
The right and left side of your shred­
der is determined from operator's
position.
SHREDDER
ASS^BLY
INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
1. (1) 7/16" Open End or Box Wrench
2. (1) 1/2" Open End or Box Wrench
3. (1) Adjustable Wrench
■ 1. Remove the shredder, hardware pack and all parts
and literature from the carton before discarding
carton.
B
B
n c
rm era rTTi
n crer
€)\ < C )
FIGURE 2
■CONTENTS OF HARDWARE PACK
A (3) Hex washer head self-tapping screws
B (8) Hex screws 1/4-20 x 1/2" long
C (8) Hex center lock nuts 1/4-20 thread
4