Engine operating and maintenance instructions – MTD 94-2105-B User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ENGINE OPERATING AND MAINTENANCE INSTRUCTIONS
FOR ENGINE MODEL 130202-3166-01
IMPORTANT
Do not start the engine before read
ing
the
following
section
of
this
manual.
A
I WARNING
I
Do not operate engine In an en
closed area. Exhaust gases contain
carbon monoxide, an odorless and
deadly poison.
Always disconnect spark plug wire from
spark plug before performing any repairs
or maintenance.
SECTION 1
BEFORE STARTING'
Fill Sump With Oil—Use a high quality detergent oil
classified “For Service SF, SE, SD or SC.” Nothing
should be added to the recommended oil.
Place engine level. Clean area around oil fill before
removing oil fill plug. Fill crankcase to the point of
overflowing. Pour slowly. Capacih/ approximately 1 V
a
pints. Do not overfill. Oil fill plug must be securely
assembled in engine at all times when engine is
running.
Recommended SAE Viscosity Grades
Fill Fuel Tank—The engine will operate satisfactorily
on any gasoline intended for automotive use. DO NOT
MIX OIL WITH GASOLINE.
The use of clean, fresh, lead-free gasoline is recom
mended, Leaded gasoline may be used if lead-free is
not available. A minimum of 77 octane is recom
mended. The use of lead-free gasoline results in fewer
combustion deposits and longer valve life.
Do not fill fuel tank to point of overflowing. Allow tank
space for fuel expansion.
17