Operation – Ryobi BTS10 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
OPERATION
straight Cross Cut
Cut made across the grain.
Miter Cross Cut
Cut made with the workpiece at an angle (other than 90°)
relative to the blade.
Straight Rip Cut
Cut made with the grain.
Compound Miter Cross Cut
Cut made with an angled blade on wood that is angled to the
blade.
Non-th rough Cut
A cut in which the blade does not cut through the entire thick
ness of the workpiece.
Bevet Cross Cut
Cut made with the blade tilted relative to the table surface
across the grain.
Page 15
Advertising