Figure 7, Chute deflector, Caution – MTD 111-020-300 User Manual
Page 6: Figure 8, Operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cable
Tie (D)
11. Secure throttle control wire to handle with
two cable ties (D) provided in hardware pack.
------ See figure 7.
12. Slip hand grips (H) on the upper end of each
handle. They will slip on more easily if you
first soak them in warm, soapy water.
13. Check all nuts and bolts for correct tightness.
FIGURE 7.
.
'À.
Chute Deflector
■
Shipping Block
To Be Removed
A<
^CAUTION
Please note that the chute deflector
on your mower is in an upright posi
tion. It is held in that position by a
shipping block. This block is used
for shipping purposes only. It must
be removed and discarded before
your mower is put into operation.
See figure 8.
FIGURE 8.
OPERATION
Keep hands and feet away from the chute area on
cutting deck. See figure 9.
CAUTION
DO
NOT
OPERATE
M O W E R
U N L E S S
GUARD OR ENTIRE
GRASS CATCHER IS
IN ITS PROPER PUtCE.
FIGURE 9.