MTD 313-230 - Manual (Page 4)

1. Follow your engine instructions for lubrication and
gasoline.
2. Disengage the main clutch (Lever UP).
3. Put the shift lever in neutral position (N).
4. Start the engine in accordance with the engine
manual.
OPERATION
1. SLOWLY engage the main clutch.
2. Move the shift lever into FORWARD (F) position.
3. To stop the forward drive of the snow thrower pull
the shift lever into NEUTRAL (N).
STARTING YOUR SNOW THROWER
NOTE
This instruction manual covers various models
and all accessories shown do not necessarily
apply to your model snow thrower.
If repairs or service is needed on the engine
or engine controls such as
the primer, choke or throt­
tle
control, contact your
nearest authorized engine
service outlet. Check the
"Yellow Pages" of your
telephone book under "En-
g i nes—Gasol i ne".
Find It Fait
In Th*
'Yellow Pages'
NOTE
For more traction, chains are
mended.
recom-
Order Model Part No.
of Chains
Tire Size
313-205 and 230 393-988 10 X 2.75
LUBRICATION
Refer to the parts drawings. Lubricate after each 25
hours of operation the parts indicated. Use multipur­
pose
automotive grease on parts marked
SAE 30 engine oil on parts marked
and