NordicTrack NTB09920 - Manual (Page 5)

PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw­
ing is the key number of the part, from the PART LIST on page 10 of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M4 X 16mm Self­
tapping Screw (27)
M6 X 16mm Screw (22)
M10 X 63mm Button Head Bolt (25)
M10 Nylon Locknut (26)
M10 X 70mm Carriage Bolt (23)
M10 X 75mm Button Head Bolt (32)
M12 X 87mm Button Head Bolt (30)
Ml2 Nylon Lockut(13) M10 X 115mm Carriage Bolt (21)