Handle assembly – MTD 215-395A User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
ri
- ' :
'
FIGURE 5. OUTER TINE ASSEMBLY
NOTE
Be sure the tines are assembled so the
sharpened edge enters the soil first.
Handle Assembly
Refer to figure 6.
Step 1. Assemble the handle assembly to the handle
mounting brackets with 4 hex bolts G, lock-
washers I and hex nuts H.
Step 2. Assemble grips to handle.
nOURE 6. HANDLE ASSEMBLY
CONTROL ASSEMBLY
Advertising
This manual is related to the following products: