Caution – MTD 113-011A User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Plastic
Cover
14.
The starter rope and handle may be secured
with a plastic cover for shipping purposes.
Remove the plastic cover and discard. See
------- figure 10.
FIGURE 10.
15.
With
the
spark
plug
wire
disconnected
and
grounded,
depress
the
blade
control
handle
and pull the starter rope out from the engine.
16.
Slip the starter rope into the rope guide bolt
-------as shown in figure 11.
17.
Check
all
nuts and bolts for correct tightness.
FIGURE 11.
Chute Deflector
M
Shipping
Block
To Be Removed
A
CAUTION
Please
note
that
the
chute
deflector
on your mower is in an upright posi
tion. It is held in that position by a
shipping
block.
This
block
is
used
for
shipping
purposes
only.
It
must
be
removed
and
discarded
before
your
mower
is
put
into
operation.
■See figure 12.
FIGURE 12.