NordicTrack NTL17950 - Manual (Page 19)

Adjust the cushioning system as desired.
See step 6 on page 13.
Follow your progress with the display.
See step 7 on page 13.
Measure your heart rate if desired.
See step 8 on page 14.
K1 Turn on the fans if desired.
See step 9 on page 14.
PI When you are finished exercising, remove the
111 key from the console.
See step 10 on page 16.
■ HOWTO.USE A"HEART'RATE PROGRAM
Select a heart rate program.
A CAUTION:
.If you have heart prob­
lems,"or if you are over 60 years of age and " ' '
.have,been.Inactive,„d.o,.not use the heart rate.
programs. If .y.oy .are taking .medication regu- .
larly, consult your physician Ic.lind.whether the';
medication will 'affect youraxercise -heart rate.
Follow the steps below to use a heart rate program,
pi Put on the optional chest pulse sensor.
You must wear the optional chest pulse sensor
(see page 26) to use a heart rate program.
Insert the key into the console.
See HOW TO TURN ON THE POWER on
page 12.
Identify yourself as user A, B, C, or D.
See step 2 on page 12.
ter
■ |
J
Programs
To select a
heart rate
program,
press the
Programs
button re­
peatedly until
the words
“Heart Rate”
and the number 1,2, 3, or 4 appear in the lower
center of the display.
As each heart rate program is selected, a profile
of the target heart rate settings of the selected
program will scroll across the matrix in the center
of the display. Note: If heart rate program 4 is se­
lected, a heart beat symbol instead of a profile will
scroll across the matrix.
Enter a maximum target heart rate setting.
Hojti-t Rat^
1 IHD.P
When a heart rate pro­
gram is selected, the
words “Heart Rate” will
appear in the Heart Rate
zone of the display and
the maximum target heart
rate setting of the program will flash. If desired,
press the Heart Rate increase and decrease but­
tons to change the maximum target heart rate set­
ting. (See the heart rate chart on page 29 for
heart rate guidelines.) To save the new maxi­
mum target heart rate setting for future workouts,
press the Save button.
Press the Start button or the Speed increase
button to start the program.
A moment after the button is pressed, the tread­
mill will automatically adjust to the first speed and
incline settings of the program. Hold the handrails
and begin walking.
Each heart rate program is divided into 20 one-
minute segments. One target heart rate setting is
programmed for each segment. Note: The same
target heart rate setting may be programmed for
two or more consecutive segments. If heart rate
program 4 is selected, the maximum target heart
rate setting is programmed for all segments.
19