Safety, Important, Safe operating practices for this unit – Troy-Bilt 14094 User Manual
Page 3: Introduction, First, Identification numbers
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Identification Numbers
Safety
Important!
Safe Operating Practices for This Unit
A
This is a safety alert symbol. It is used in this manual and on the unit's decals to alert you to
potential hazards. Whenever you see this symbol, read and obey the safety message that follows it.
Failure to obey the safety message could result in personal injury or property damage.
Introduction
This machine is capable of amputating
hands and feet and throwing objects.
Failure to observe the following safety
instructions could result in serious injury
or death.
Serious accidents which may cause injury
or property damage can occur if the
following safety guidelines are not
followed. The operator is responsible for
accidents or hazards involving this unit.
Preventing accidents is the responsibility
of every equipment operator. Accidents
can be prevented.
First
Be careful before, during and immediately
after use of any powered equipment. The
following general safety precautions must
be fully understood and followed during
operation. Review these instructions
frequently and never take chances. If you
do not understand any part of this manual
or need assistance, contact your dealer or
our service department.
Read the Owner/Operator Manual for
the tractor to be used with this unit.
Only allow responsible adults, who are
familiar with the instructions, to
operate unit.
Know the location and function of all
controls before operating unit. Know
how to stop engine and attachments
quickly in case of emergency.