MTD 11-096R000 - Manual (Page 13)

Models 093R thru 098R
PARTS LIST FOR MODEL 098R MULCHING ROTARY MOWER
<EF.
NO.
PART
NO.
CODE DESCRIPTION
REF.
NO.
PART
NO.
CODE DESCRIPTION
1 747-0748 Control Handle Ass’y- (Std.) 33 742-0500 20" Mulching Blade
731-1135 Control Handle Ass’y- w/Plastic 34 710-1055 Hex Bolt 3/8-24 x 1" Lg.
3 17174 Cable Brkt. 35 736-0169 L-Wash. 3/8" I.D.*
4 710-1216 Hex Bolt 1/4-20 X 1.875" Lg. 36 712-0241 Hex Nut 3/8-24 Thd.
5 736-0175 Spr. Wash. 1 / 4 " I.D. 37 712-0324 Hex L-Nut 1 / 4-20 Thd.
6 712-0287 Hex Nut 1 / 4-20 Thd.* 39
— Engine
7 720-0226 Grip (Optional) 44 735-0639 Spark Plug Boot
8 749-0756A Upper Handle 46 738-0102 Axle Bolt
10 710-1205 N Rope Guide Bolt 47 736-0105 Bell-Wash. .400" I.D. x .88"
11 736-0119 L-Wash. 5/16" I.D.* 48 738-0507B Shid. Bolt .50" Dia. x .357"
12 712-0267 Hex Nut 5/16-18 Thd.* 49 14832 Spring Lever Ass’y. w/Knob
13 710-0671 Curved Carriage Bolt 5/16-18 50 15262B Pivot Bar
X 1.38" Lg. 51 15261A Height Adj. Plate
14 726-0240 Cable Tie 52
★ *
Wheel Ass’y. Comp.
15 749-0372B Lower Handle 53 14578 Height Adj. Ass’y. Comp.—
16 714-0104 Hairpin Cotter R.F. & L.R.
17 17098 Hinge Clip 14579 Height Adj. Ass’y. Comp.—
18 731-0872 Rear Flap L.F. & R.R.
19 12935A Handle Bracket Ass’y.—L.H. 54 746-0820 Throttle Control Ass’y.tt
20 12936A Handle Bracket Ass’y.—R.H. 746-0834 Throttle Control Ass’y.t
21 736-0356 Bell-Wash. .39" I.D. x 1.38" 55 746-0553 Control Cable—36" tt
22 712-0798 Hex Nut 3/8-16 Thd.* 746-0737 Control Cablet
23
* *
Hub Cap (Optional) 57 710-0654A Hex L-Wash. Hd. Scr.
24
* *
Wheel Bearings 3/8-16 X 1.0" Lg.
29 682-0002 638/N 20" Deck Ass’y. 58 736-0232 Wave Washer .53" I.D.
^30 753-0485 Blade Adapter Kit (Splined) 59 710-0603 Hex Wash. Hd. B-Tap Scr.
J1 736-0453 Bell-Wash. .46" I.D. 5/16-18 x .5" Lg.
710-0757 Hex Bolt 7/16-20 x 1.5" Lg.
tModel 093R & 095R only.
ttModels 094R, 096R & 098R only.
*For faster service obtain standard nuts, bolts and washers locally.
If these items cannot be obtained locally, order by part number and
size as shown on parts list.
*’Optional Hub Caps RiLF. 23
Description Part No.
Gray (for “S” Wave Wheels)
Beige (for “S” Wave Wheels)
Black (IV
2 " Dia.)
731-0981A
731-0982A
720-0251
CODE: N notates a new part (not previously existing). A three digit
number is the color code. Specify color code if color or finish is
important when ordering parts, [i.e., 638 for Red Finish],
NOTE: The engine is not under warranty by
the mower manufacturer. .. If repairs or
service is needed on the engine, please
contact your nearest author­
ized engine service outlet.
Check the “Yellow Pages” of
your telephone book under
“Engines—Gasoline.”
Find It Fast
In The
Yellow Pages
’WHEEL CHART
WHEELS W/O BEARINGS WHEELS WITH BEARINGS
TREAD”’ ASS’Y. COMP. TREAD”’ ASS’Y. COMP. BEARINGS
Bar 734-1608 "S” Wave 734-1513B (Gray) Ball Brg. V 2 " I.D.—741-0180 (2 per wheel)
Diamond 734-1655 “S” Wave 734-1517B (Beige) Ball Brg. 1 / 2 " I.D.—741-0180 (2 per wheel)
“S” Wave 734-1512A
’Tread Type: Waffle Rib : Bar ‘T” Tread “S” Wave ; Diamond
13