Note, Figure 6 – MTD 242-595A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LEFT HAND
SIDE OF UPPER
HANDLE
PREASSENIBLED
CLUTCH PLATE
ASSEMBLY (L)
NOTE
Right and left hand side is determined
from behind the edger, in the opera
tor's position.
L’OCK WASHER (F),
HEX NUT (G)
FIGURE 6.
HEX BOLT (E)
CLUTCH ROD (N)
7. Place preassembled clutch plate assembly (L)
on the left hand side of upper handle. Secure
in place with hex bolts (E), lock washers (F)
and hex nuts (G). See figure 6.
8. Place compression spring (H) over straight end
of clutch rdd (N). Place end of rod in spindle
bracket assembly and secure with cotter pin (J),-
See figure 7.
FIGURE?.
COTTER
PIN U)
V’V.
CLUTCH
LEVER
CLUTCH
ROD (N)
9. Place hook end of clutch rod (N) in clutch
lever. Secure with cotter pin (J). See figure 8.
FIGURES.