Figures – MTD 240-685-000 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HAND
KNOB (F)
Place air duct assembly (P) over opening on top
of housing. Secure with two hand knobs (F) and
belleville washer (G). See figure 7.
FIGURE 7
BAG (T)
Assemble the bag by slipping the top straps on
bag (T) over upper handle. Hook two small straps
over stud pins on handle. Slip elastic opening of
bag over air duct assembly. See figure 8.
NOTE
Be certain elastic on bag is placed over
the flanges on air duct assembly.
FIGURES
6
.
NOTE
Steps 6, 7, 8 and 9 are for self-propelled
units only.
Assemble the clutch grip (A) to the left hand
side of upper handle. Secure in place with clevis
pin (C) and hairpin clip (B). See figure 9. Head'
of clevis pin should be to the outside of handk