Lock washer. . throttle (d), Note – MTD 112-638A User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9. Place the fuel tank in position on the fuei tank
mounting bracket. Secure in place with two
plastic cable ties (A). See figure 9. Cut off ex
cess ends.
FIGURE 9.
Fuel Line
Hose Clamp (L)
10
.
Pliers
Using a pair of pliers, slip the hose clamp (L)
over the end of fuel line (already on engine).
Place end of fuel line over fuel shut-off valve
(on bottom of tank). Secure with hose clamp
(L). See figure 10.
FIGURE 10.
Lock Washer. .
Throttle (D)
Control
\ Hex Nut
(E)
11
,
Place the throttle control in position on the
left hand side of the upper handle. Secure
with hex bolt (C), lock washer (D) and hex nut
(E) provided. See figure 11.
NOTE
Reference to left or right side of
machine is from operator’s position
at the handle facing forward.
FIGURE 11.