Step 3: connect the creative rf receiver, Step 3: connect the creative rf receiver -3 – CREATIVE Desktop Wireless 6000 User Manual
Page 18
Advertising
Installing Hardware 2-3
Step 3:
Connect the
Creative RF
Receiver
1. Turn on your computer.
2. Connect the USB connector on the RF receiver to the USB port on your
computer as shown in Figure 2-5.
3. Place the RF receiver at least 8 inches (20 cm) from your computer or monitor.
Make sure that you
have inserted
batteries into the
mouse and keyboard
before Step 3.
Figure 2-5: Connecting the RF receiver to the computer
Advertising