Taylor Body Fat Analyzer and Scale 5738BL - Manual (Page 10)

10
You must wait several hours before taking a body fat reading when:
drinking coffee or alcohol, taking diuretic medications, or exercising. These
all affect your level of hydration and the accuracy of this analyzer.
• Uses BIA (Bioelectrical Impedance Analysis) to determine body fat and
body water percentage
• Weight Capacity: 350 lb or 160 kg or 25 st
• Weight Graduation: 0.2 lb or 0.1kg or 1 lb
• Body Fat Graduation: 0.1% (in the range from 5% - 60%)
• Body Water Graduation: 0.1% (in the range from 43% - 73%)
• Height Range: 2' 5.5” – 7' 4.5” (75.0 – 225.0cm)
• Age Range: 10-85 years
• Weight-only feature with automatic step on
• Data can be stored for up to 4 individuals
1. OVERLOAD WARNING: the maximum weight capacity of this scale is
350 lbs / 160 kgs / 25 st. Remove the weight immediately when the scale
displays “Er2”; otherwise, permanent damage to the scale will occur.
2. The product is intended for home / consumer use only; it is not intended
for professional use in hospitals or medical facilities.
3. Do not disassemble the product. Other than replacing the battery, it
contains no user serviceable parts.
4. Clean after use with a lightly dampened cloth. Do not use solvents or
immerse the product in water.
5. Your scale contains sensitive electronic parts. Avoid rough treatment. Do
not drop, kick, or jump on it. Treat it with care to ensure the best
performance.
6. Do not store the scale where you store cleaning chemicals. The vapors
from some household products may affect the electronic components
of your scale. Do not store the scale on its side.
7. This scale is a sensitive weighing device. To prevent run down of the
battery, do not store anything on the scale.
8. Do not dispose of batteries in fire. Batteries may explode or leak.
Remove the battery if the scale will not be used for a long period of time.
SPECIFICATIONS
PRECAUTIONS