Fault codes, Repairs and replacement, Ordering information – Johnson Controls A419 Series User Manual

Page 11

Advertising
background image

A419 Series Electronic Temperature Controls with Display and NEMA 1 or NEMA 4X Watertight Enclosures

Product/Technical Bulletin 11

Fault Codes

A419 controls are programmed to display certain fault
codes on the LCD as described in Table 5.

Table 5: Fault Codes Defined

Fault Code

Definition

System Status

Solution

SF

flashing

alternately with OP

Open temperature
sensor or sensor
wiring

Output functions according to
the selected sensor failure
mode (SF setting)

See Troubleshooting section.

Cycle power to reset the control.

SF

flashing

alternately with SH

Shorted temperature
sensor or sensor
wiring

Output functions according to
the selected sensor failure
mode (SF setting)

See Troubleshooting section.

Cycle power to reset the control.

EE

Program failure

Output is off

Reset the control by pressing the Menu
button. If problems persist, replace the
control.

Repairs and Replacement

Do not attempt to repair or recalibrate the
A419 Control. In case of a defective or improperly
functioning control, contact your nearest Authorized
Johnson Controls/PENN® Distributor or Sales
Representative.

When contacting your Johnson Controls/PENN
distributor, have the model number of the control
available. This number can be found on the label
inside the cover of the control.

Ordering Information

See Table 6 to order controls and accessories.

Table 6: Ordering Information

Product Code
Number

Item

Description

A419ABC-1C

Line Voltage, NEMA 1 Enclosure
A419 Series Electronic Temperature Control
with Display, A99 Sensor Included

Supply Voltage:

120 or 240 VAC

Range:

-30 to 212°F (-34 to 100°C)

Differential:

1 to 30F° (1 to 30C°)

Sensor Lead Length: NEMA 1 Models 6-1/2 ft (2 m),

NEMA 4X Models 9 in (0.25 m)

A419AEC-1C

Line Voltage, NEMA 4X Enclosure
A419 Series Electronic Temperature Control
with Display, A99 Sensor Included

A419GBF-1C

24 VAC, NEMA 1 Enclosure
A419 Series Electronic Temperature Control
with Display, A99 Sensor Included

Supply Voltage:

24 VAC, Class 2

Range:

-30 to 212°F (-34 to 100°C)

Differential:

1 to 30F° (1 to 30C°)

Sensor Lead Length: NEMA 1 Models 6-1/2 ft (2 m),

NEMA 4X Models 9 in (0.25 m)

A419GEF-1C

24 VAC, NEMA 4X Enclosure
A419 Series Electronic Temperature Control
with Display, A99 Sensor Included

A99BB-200C
A99BA-200C

A99BB-25C

Replacement Temperature Sensors

PTC Sensor with 6-1/2 ft (2 m) Leads
PTC Sensor with 6-1/2 ft (2 m) Shielded Leads
PTC Sensor with 9 in (0.25 m)

BKT287-1R

BKT287-2R

PLT344-1R

Accessory Mounting Hardware

12 in. (305 mm) long DIN Rail

36 in. (914 mm) long DIN Rail

Two End Clamps for DIN Rail Mounting

CLK350-2C

Digital Clock

7-Day Programmable Digital Clock for controlling
Temperature Offset Function

WEL11A-601R

Immersion Well

Immersion Well for applying sensor in fluid applications

Advertising