Flip Video UltraHD camera - Manual (Page 2)

Install Battery Pack
3
1
2
Welcome to Flip Ultra
HD™
1 Slide battery latch to unlock.
2 Slide front panel down.
3 Position rechargeable Lithium-ion battery pack with +
and
–
at the
right side and Flip Video™ logo facing up.
Note: The battery pack is shipped partially charged. For best results, fully
charge (up to 3 hours) before use. Simply follow steps in the Recharge Battery
Pack section.
Using AAA Lithium Batteries
If you need a backup power source for your UltraHD, three
AAA lithium batteries will provide power for a limited period of time.
Note: Alkaline batteries do not provide sufficient power for reasonable
video camera usage and are not recommended.