VeriFone Vx510 - Manual (Page 15)

POS terminal Vx510 Instructions for use
15
9. Returning of transaction
Procedure of performing the operation:
1
READY FOR TRANSACTION
pull card
Press a key [ F1] –Menu. Menu, shown at step 2, will
be displayed on the screen.
2 Returning F2
Offline purchase F3
Purchase(manual) F4
With keys [ F2], [F3], [F4] is possible to select a
required operation. To make returning, key [F2] must
be pressed .
3
Enter dynamic password
****
Must be entered dynamic password and pressed [ ].
To find out a dynamic password, must call to
technical assistance No. (phones indicated at
“introduction”).
4 Pull card
Or enter
Card number
Card must be pulled through or number entered with
terminal keys.
5
Returning
Enter amount
Ls 0.00
Enter the amount of money, then press key [ ].
6
Last 4 digits
Enter last four digits of card’s number and press [ ].
Use key [ ] , to alter incorrectly entered digit.
Step 6 may be omitted, if Bank gives such permission.
During this time terminal is printing merchant data and amount on the reciept.
7
Calling...
Connecting_
During terminal’s calling to authorisation center and card
verification, the following messages may be displayed
on the screen
8
Printing a copy...
As a result of successful transaction a two copies of the
reciept will be printed.