Configuring port triggering, Configuring port triggering -9, As described in – NETGEAR N150 Wireless Router WNR1000 User Manual

Page 75: Configuring port triggering” on, Another feature to solve applic

Advertising
background image

N150 Wireless Router WNR1000 User Manual

Fine-Tuning Your Network

5-9

v1.0, January 2009

2. Click Edit Service or Delete Service to make changes.

3. Click Apply.

Application Example: Making a Local Web Server Public

If you host a Web server on your local network, you can use port forwarding to allow Web requests
from anyone on the Internet to reach your Web server.

To make a local Web server public:

1. Assign your Web server either a fixed IP address or a dynamic IP address using DHCP address

reservation, as explained in

“Using Address Reservation” on page 4-4

. In this example, your

router will always give your Web server an IP address of 192.168.1.33.

2. In the Port Forwarding screen, configure the router to forward the HTTP service to the local

address of your Web server at 192.168.1.33.
HTTP (port 80) is the standard protocol for Web servers.

3. (Optional) Register a host name with a Dynamic DNS service, and configure your router to

use the name as described in

“Using a Dynamic DNS Service” on page 4-5

.

To access your Web server from the Internet, a remote user must know the IP address that has
been assigned by your ISP. However, if you use a Dynamic DNS service, the remote user can
reach your server by a user-friendly Internet name, such as mynetgear.dyndns.org.

Configuring Port Triggering

Port triggering is a dynamic extension of port forwarding that is useful in these cases:

More than one local computer needs port forwarding for the same application (but not
simultaneously).

An application needs to open incoming ports that are different from the outgoing port.

When port triggering is enabled, the router monitors outbound traffic looking for a specified
outbound “trigger” port. When the router detects outbound traffic on that port, it remembers the IP
address of the local computer that sent the data. The router then temporarily opens the specified
incoming port or ports, and forwards incoming traffic on the triggered ports to the triggering
computer.

Advertising