Garmin eTrex Legend - Manual (Page 51)

45
The Setup Pages - Overview
The Setup Pages allow you to customize your eTrex
Legend to your personal preferences. You can choose
Time settings, Units of Measure, Display backlighting and
contrast settings, Heading measurement, Interface options
and System operating mode.
By highlighting the icons on the Setup Menu and then
pressing in on the CLICK STICK, you can display the
Setup Page for each of the menu items.
Time Page - Overview
You can set the time to match your location or for a
projected location anywhere in the world.
Time Format - Allows you to choose from
12 or 24 hour time format. When you select the
12 hour time format, the clock will read like a
standard clock with 12 hour AM amd PM cycles. The
24 hour option sets the clock to display a 24 hour
cycle (Military Time).
Time Zone - Can be set to one of the eight US
Time Zones, or 24 International Time Zones (nearest
city or geographical region) When selecting ‘Other’
you can enter the UTC Time Offset for any other
time zone. Refer to the instructions for setting the UTC
Time Offset on page 54 of the Appendices.
Daylight Savings Time - Can be turned On or Off
or set to Automatic.
Step-by-Step Instructions
To set the time:
1. Use the PAGE button to access the Main Menu.
2. Use the CLICK STICK to highlight the Setup Icon and
then press it in to display the SetUp Menu.
3. Use the CLICK STICK to highlight the TIme icon and then
press it in to display the TIme Page.
4. Use the CLICK STICK to highlight the ‘Time Zone’ fi eld
then press it in to display the list of time zone options.
5. Highlight a time zone from the list of 8 U.S. time zones
or 24 international time zones (defi ned by nearest city or
geographically) and then press in on the CLICK STICK.
6. Observe the correct time displayed at the bottom of the page.
Setup Menu
Time Setup Page
Time Zone Options
Daylight
Savings
Options
Time Format
Options
Setup Pages
Reference