SoundMax SM-CMD3000 - Manual (Page 17)

17
Inserting the USB device
Insert the USB device into USB jack. Then the playing mode will be changed into USB mode.
The first USB device track playback will start.
Note:
USB functions (flash memory type) MP3 music play
FAT 12/ FAT 16/FAT 32 is possible
-
FAT 12/16 (dir: 200 support, file:500 support),
-
FAT 32 (dir: 200 support, file:500 support).
Filename: 32 byte/ Dir name: 32byte.
Tag (id3tag ver2.0)
-
Title/ Artist/Album: 32 byte support.
USB format supports 2.0. Capacity: 8 MB ~ 1 Gb.
Loading/eject a disc
-
Press the REL button on the panel. Insert the disc with the printed side facing upward into the slot.
-
Press EJECT button to eject the disc.
Playing/pausing playback
-
When the disc is in the playback will start automatically. Or you can press the SOURCE button to start
playback. To ensure good system performance, wait until the unit finishes reading the disc information
before proceeding.
-
Press the PAUSE/PLAY/PAUSE button to pause the playback. Press again to resume the playback.
Stop playback
During MP3/MPEG-4/USB mode, press STOP button on the RC to stop the playback. Press it again to
resume the playback.
During VCD/CD mode, press STOP button to pause playing, press PAUSE/PLAY/PAUSE to play, and press
STOP button twice to stop playing completely. To start playing press PAUSE/PLAY/PAUSE button.
Using the number buttons
Press the number buttons to insert the track/chapter number.
Select a track by using Number buttons 0~9. The selected track will be played automatically.