Concord Camera 3132z - Manual (Page 49)

Setting Your Camera for Printing
44
File Number Reset
You can reset the file number function in the camera while in the “SET” mode.
1. Turn the mode dial to SET ( ).
2. Press the DOWN button ( ) until File NO. RESET
( ) is highlighted.
3. Press the RIGHT/LEFT button ( / ) to toggle between YES/NO.
4. Press the SET button to confirm the setting.
YES - When this option is selected, the camera assigns all subsequent
file numbers sequentially in ascending order, starting from the last num-
ber used. If the memory card is formatted or a new card is inserted in the
camera, the image file number will continue from the last number used.
NO - The camera does not store the last file number used. When an-
other memory card is inserted or a new folder is created, the image file
number starts from the lowest number available.