Cabletron Systems HSIM-A6DP- - Manual (Page 92)

Chapter 4: LANVIEW LEDs
4-2 HSIM-A6DP User’s Guide
Table 4-1 HSIM LEDs
Table 4-2 APIM LEDs
LED Color Definition
TX
(Transmit) Green
(Flashing)
Cells being transmitted.
RX
(Receive) Green
(Flashing)
Cells being received.
LED Color Definition
LNK
(Link) Green (Solid)
Off Have link.
No link.
STS
(Status)
Green (Solid) APIM OK.
Red (Solid)
Fault with media. In most cases, the
APIM automatically corrects this
condition without interrupting
operations. If the LED is red and
remains red, contact Cabletron
Systems Global Call Center. Refer to
Section 1.7 , Getting Help .
Red
(Blinking)
APIM should be replaced. The APIM
will still function, but packet switching
performance may be affected. If the
APIM goes into this LED state
contact Cabletron Systems Global
Call Center. Refer to
Section 1.7 ,
Getting Help .