Cambridge Audio KP10 - Manual (Page 13)

Incognito A-BUS keypad 13
Standby/On
Press to switch the keypad between On and Standby mode. By pressing and holding the
Standby button for about 2 seconds, all KP10s connected to the AH10 hub will be turned
off. If the KP10 is connected to a Cambridge Audio Incognito Ready Amplifier rather than
an AH10 hub, the amplifier will be turned off.
Volume up
Press to increase the volume or other sound adjustment.
Source select (right)
Use this key to select the current active source.
Volume down
Press to decrease the volume or other sound adjustment.
Source select (left)
Use this key to select the current active source.
IR window
Point the Incognito LR10 Learning Remote towards this window. A small flashing LED
behind this window indicates operation.
7
8
9
10
11
12
KP10 A-BUS keypad